BENJAMIN MOORE AND CO -- 215-44, REGAL WALL SATIN CELERY  -- 8010-00N029596
<pre>=====================  Product Identification  =====================

Product ID:215-44, REGAL WALL SATIN CELERY
MSDS Date:11/30/1988
FSC:8010
NIIN:00N029596
MSDS Number: BMVYX
=== Responsible Party ===
Company Name:BENJAMIN MOORE AND CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:201-573-9600
CAGE:HO858
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950
Company Name:BENJAMIN MOORE AND CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-344-1200; 201-573-9600
CAGE:HO858

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III). VP:.1 @ 77F
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2.1-2.2%
OSHA PEL:50 PPM, C
ACGIH TLV:50 PPM, C VAP/MIST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 1.6-2.9%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:STODDARD SOLVENT; (ODORLESS MINERAL SPIRITS). VP:1.2 @ 20C
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 1.4-1.5%
Other REC Limits:500 PPM (MFR)
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRITATION OF RESPIRATORY
    TRACT. SKIN/EYE:PRIMARY IRRITATION. INGESTION OF LARGE AMOUNTS
    COULD CAUSE SERIOUS INJURY. POSSIBLE ANESTHETIC EFFECT FROM MINERAL
    SPIRITS CONTENT. CHRONIC: NONE  KNOWN.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE QUARTZ:GROUP 2A
    (IARC), GROUP 2 (NTP).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN
    ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. GET MD HELP FOR ANY BREATHING
    DIFFICULTY. EYE:FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15
    MINUTES. CALL MD. SKIN:WASH WITH SOAP AND WATER. INGEST:DRINK 1 OR
    2 GLASSES OF WAT ER TO DILUTE. DO NOT INDUCE VOMITING. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS.
Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH
    SKIN OR BREATHING OF SPRAY MIST OR SANDING DUST. CLOSE CONTAINER
    AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
    INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIED FOR
    PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED
    OR CONFINED AREAS.
Ventilation:ADEQ TO MAINTAIN WORKING ATMOSPHERE BELOW TLV & LEL. (SEE
    ING SECT FOR ING DATA AND CONC). MECHANICAL EXHAUST (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
    HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
% VOLAT:61.5-67.5. VENT:MAY BE REQUIRED IN CONFINED AREAS.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.28-1.31
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CO AND CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.